Electric Shock First Aid: What to Do Immediately and Safely
Electric shock first aid starts with protecting yourself. Never touch a person who may still be connected to live electricity. Safely isolate the supply if possible, call for help, and begin care only when the area is safe.
Electric shock emergency
DO NOT TOUCH THE PERSON while electricity may still be live.
Stay clear of the electrical source. Disconnect power only if you can do so safely. Do not approach fallen power lines or high-voltage equipment. Call emergency services, then follow the dispatcher's instructions.
Electric shock first aid: six safe steps
An electric shock can interrupt breathing, affect heart rhythm, cause burns and damage tissue beneath the skin. The right response begins by avoiding a second victim: do not rush into an energized area.
Check the scene first
Look for exposed cables, damaged appliances, wet surfaces, electrical panels and downed power lines. Keep yourself and bystanders away. Assume the source is live until it is safely isolated.
Isolate the electrical supply
Switch off the supply or unplug the appliance only if you can do so without danger. Do not touch the injured person or attempt improvised rescue with objects. If isolation is uncertain, stay clear and wait for trained responders.
Call emergency services
In the UAE, call 998 for an ambulance when someone has an electrical injury, particularly with burns, confusion, breathing problems, collapse, muscle contractions or other concerning symptoms. Give the exact location and explain the electrical hazard.
Check responsiveness & breathing
Once the electricity is confirmed isolated and the scene is safe, check if the person responds and is breathing normally. If unconscious but breathing, follow the dispatcher’s guidance and monitor continuously. Avoid unnecessary movement.
Provide CPR / AED care if needed
If unresponsive and not breathing normally, start CPR as directed by the dispatcher. For an adult, push hard and fast in the centre of the chest, about 100–120 compressions per minute. Use an AED as soon as available and follow its prompts. Trained rescuers should follow their current CPR guidance.
Care for burns & seek assessment
After eliminating electrical danger and addressing immediate life threats, cool a burn with cool running water where practical, then cover loosely with a sterile non-stick dressing. Do not apply ice or creams or remove stuck clothing. Arrange professional medical assessment even if the person seems well.
High-voltage exception: Never approach power lines, substations or energized industrial equipment to carry out a rescue. Keep well away and wait for the electricity provider or emergency responders to make the area safe. Read the high-voltage precautions below.
Electric shock first aid quick checklist
Save this for awareness training. In an actual emergency, prioritize the dispatcher’s instructions and your own safety.
✓ DO
- Stop and check for live electrical hazards.
- Turn off the supply if it is safe to reach.
- Call UAE ambulance 998 when needed.
- Assess breathing only once the scene is safe.
- Start CPR / use an AED if indicated.
- Arrange a medical assessment.
✕ DON'T
- Touch someone connected to electricity.
- Approach downed or high-voltage lines.
- Attempt rescue with improvised tools.
- Move an injured person unnecessarily.
- Put ice, butter or creams on burns.
- Ignore symptoms or hidden injury.
Electric Shock First Aid Posters — English & Arabic
View and download the two electric shock first-aid posters already hosted by System Care Printing. These original PDF files are embedded below so visitors can preview their actual artwork and open the print-ready documents.
UAE Electric Shock First Aid — Bilingual A3
English–Arabic emergency poster featuring the UAE ambulance number 998, scene isolation, CPR/AED and burn-care reminders.
FIRST AIDالإسعافات الأولية
للصدمة الكهربائية
UAE emergency service998اتصل بالإسعاف فوراً
View the original PDF inline
Stylized preview above; expand to see the exact original portrait A3 PDF. Use the direct link if your browser cannot display PDFs.
Electric Shock — Illustrated English A3 Poster
Dense, illustrated reference poster covering electric-shock hazards, response, breathing, CPR and burns. Contains UK emergency numbers 999/112, not the UAE ambulance number.
Electric Shock
and response
and assessment
response
assistance
guidance
awareness
and support
care
and care
View the original PDF inline
Stylized preview above; expand to see the exact original landscape A3 PDF. Review country-specific and older guidance before use in UAE workplaces.
Ask about safety-poster printing, substrate, lamination, quantities and delivery. Quick job contact: +971 55 311 5259.
The embedded PDFs are original files from systemcareprinting.com. Browser PDF support varies; the direct links always provide an alternative to the embedded viewer. These posters support workplace training but do not replace it.
Electric shock symptoms: when to get help
A person may look unharmed after electrical contact and still have serious internal damage. The consequences depend on the type of current, the route it took through the body and the extent of the exposure. Mayo Clinic explains why external burns do not indicate the full extent of injury.
Even after an apparently minor shock: arrange prompt medical advice or assessment. Do not assume the absence of visible burns means the exposure was harmless.
What not to do after an electric shock
- Do not touch the person until the electrical source is disconnected and the environment is safe.
- Do not approach fallen overhead wires, substations or other high-voltage hazards. Avoid touching nearby objects or water that could be energized.
- Do not try to pull someone away with your bare hands or rely on a household object as a guaranteed insulator.
- Do not move the person needlessly, especially if a fall or spinal injury is possible; move only for immediate safety or essential lifesaving care.
- Do not apply ice, ointment, butter or adhesive material to burns, and do not peel off attached clothing.
- Do not delay professional assessment because the person feels better or shows no visible injury.
Low-voltage and high-voltage electric shock
Domestic appliances and industrial systems present different exposure risks, but both can cause serious injury. Never judge severity by voltage labels alone or by how the person looks afterward.
| Situation | Recommended response |
|---|---|
| Household appliance or outlet | Stay clear; disconnect at a safe accessible switch or plug only if you can do so without touching the source or person. Call for medical help and assess the person only after isolation. |
| Workplace panel / equipment | Keep workers away; use competent personnel and established isolation procedures. Do not open equipment or touch live conductors to perform rescue. |
| High-voltage line / substation | Do not approach, touch cables or nearby objects, or attempt rescue. Alert emergency responders and the utility operator; wait for verified isolation. |
Water and wet ground can increase electrical hazards. Never enter a flooded or damaged electrical area to assist someone until competent responders confirm it is safe.
Electric shock first aid at work: an HSE response plan
For electrical contractors, MEP teams, maintenance providers and facility managers in Abu Dhabi, first aid should be one component of a larger electrical safety system. Emergency readiness is stronger when workers know who isolates equipment, how to call emergency services and where the nearest AED is located.
A warning sign is not a substitute for guarding, isolation, maintenance, training or safe work authorization. Always follow approved project specifications and the safety rules applicable to the site.
How to reduce electrical accidents
Prevention starts well before an incident. Regular inspection of equipment, safe work planning, suitable protective measures and clear identification of circuits all help people recognize hazards and avoid unintended contact.
- Have electrical installations inspected and maintained by qualified personnel.
- Take damaged cords, exposed connections and defective equipment out of service.
- Keep electrical equipment protected from water and inappropriate handling.
- Identify circuits, panels, isolators and equipment using durable labels that match approved drawings.
- Provide visible warnings at relevant access points and electrical rooms.
- Use approved permit-to-work, isolation and testing procedures appropriate to the task.
- Train people to recognize warning signs and know how to summon help.
For additional context, read our workplace safety signage guide.
Electrical safety signs and labels for industrial projects
Clear signs and permanent identification support hazard awareness, routine inspection, equipment maintenance and coordinated project handover. Their effectiveness depends on correct placement, suitable materials and consistency with project specifications.
System Care Printing, based in Musaffah, Abu Dhabi, provides customized industrial engraving and project signage services for contractors and procurement teams. Our relevant product categories include:
We prepare quotations based on provided drawings, sizes, materials, quantities and applicable project requirements. Learn more about our engraving and etching services. Product signage supports workplace risk controls; it does not provide first aid or replace professional electrical safety procedures.
Electric shock first aid FAQs
What is the first thing to do after an electric shock?
Check for electrical danger and do not touch someone who may still be energized. Safely turn off the power if you can, call for help and approach only once the area is safe.
Can I touch someone who has been electrocuted?
Not while the person may still be in contact with electricity. Electricity must first be isolated and the area confirmed safe. High-voltage rescue must be left to trained responders.
When should I call an ambulance?
Call UAE ambulance 998 immediately for collapse, breathing difficulty, confusion, suspected rhythm problems, significant burns, seizures or other concerning symptoms. Anyone with an electrical injury should obtain medical assessment.
Can a small electric shock be dangerous?
Yes. Even a shock without a visible burn can cause injury. Seek professional medical advice or assessment rather than relying on how the person initially feels.
Should someone see a doctor if they feel fine?
Yes, an electrical injury warrants medical assessment because internal damage may not be visible. A healthcare professional can decide what evaluation is needed.
When should CPR be started after an electric shock?
Only after the electrical danger is eliminated and the scene is safe. If the person is unresponsive and not breathing normally, call emergency services and start CPR, following dispatcher and current CPR guidance. Use an AED when available.
What should I do about an electrical burn?
First ensure electricity is isolated and immediate life threats are addressed. Cool the affected area with cool running water if safe and practical; cover with a clean, sterile non-stick dressing. Do not use ice or creams. Get urgent medical assessment.
What is different about high-voltage electric shock?
High-voltage sources can endanger anyone nearby, even without direct contact. Do not approach downed lines, substations or industrial equipment; wait for the utility provider or emergency responders to secure the area.
What is the UAE ambulance emergency number?
Dial 998 anywhere in the United Arab Emirates for an ambulance. Provide your location and describe both the medical emergency and any remaining electrical danger.
Trusted first-aid sources
This educational guide is informed by published guidance from established first-aid and medical authorities. For real emergencies, follow your local dispatcher and trained medical responders.
- St John Ambulance — Electric shock first aid
- Mayo Clinic — Electrical shock: First aid
- American Heart Association — Emergency treatment of cardiac arrest
- St John Ambulance — Burns and scalds first aid
- UAE Government — Handling emergencies (ambulance 998)
Need electrical safety signs or industrial identification tags in Abu Dhabi?
We manufacture and supply customized electrical danger signage, engraved panel identification, MEP tags and industrial nameplates according to customer drawings, quantities and project requirements. Share your BOQ or artwork for a tailored quotation.
Quick poster/signage quotations: +971 55 311 5259 · Musaffah Industrial Area, Abu Dhabi · +971 2 679 7507 · systemcareprinting.com